The Customer record

One Customer: its Countries, Projects, Contractors and administrators, its status, settings and add-ons, and the commercial details Obtempera keeps.

For: System AdminLast checked: 2026-11-13

The ‹ arrow beside the Customer's name takes you back to the page you came from, or to the Customers list if you opened the record from an email, a bookmark or a new tab. The header shows the Customer's name and identifier, its Plan, Subscription, Customer Status and Compliance colour, the roll-up of every Worker under it: Red if any is red, then Grey, then Amber, Green only when all are green (see Worker statuses). On a phone Customer Status and Compliance stay in view, on a row under the name. The Health check verdict opens the Customer's health check, and + Add Country is beside it. Each Country and Project row shows its own colour beside its status. A contract that expires within 90 days, or has expired, raises a banner at the top.

The tiles count the Customer's Countries, Projects, Contractors, Workers and Administrators, and jump to their section. The bar under them jumps to each section: Countries, Projects, Contractors, Administrators, Settings, Privacy Notice, Training and Licensing (each only while its add-on is on) and Commercial.

Countries

One row per Country, with its Projects, Contractors and Workers, whether it is Active or Inactive, and its Country Compliance switch.

  • + Add Country offers the Countries active in the Country catalogue that the Customer does not have yet. By default, each Customer Administrator becomes HR and EHS Administrator in the new Country too.
  • The Country Compliance switch turns Contractor Country Compliance on or off for that Country, at once (see Contractor Country form). Switching it off asks first: it applies to all the Customer's Contractors in that Country, and their compliance history is kept. An inactive Country's switch cannot be used.
  • Remove shows what still stands in the way: open Projects, operational Contractor registrations and active Worker assignments. It is refused until they are closed or moved. Then Remove Country makes the Country Inactive for the Customer: nothing new happens there, and its Projects, registrations, compliance records and audit history are kept. The HR and EHS Administrator roles the Customer Administrators had there by default end with it.
  • Re-add makes an inactive Country active again.

Projects, Contractors, Administrators

Each section has its own + Add Project, + Add Contractor or + Add Administrator, and its rows open the record. A long list shows its first rows and says so, with a link to the full register.

Administrators has one row per person, with their roles and where each applies. Reset password emails them a reset link, after you confirm. The whistleblowing roles are never listed here: Obtempera does not name who reads reports, so the Whistleblowing panel shows the Disclosure Administrators and only how many handlers there are.

Settings

Whether the Customer is active, how compliance runs for it, what its Workers read, and which add-ons are switched on. Only System Admin sees this section.

Customer status

The card shows whether the Customer is Active, Suspended or Archived, and what that means. Change status opens the Customer's name and status; Save changes keeps them. No reason is asked, but changing the status asks you to confirm first, and the confirmation says exactly what will happen. Each change is recorded in the audit trail.

  • Suspended locks the Customer. Nobody there can sign in: its administrators and reviewers, its Contractors' administrators and its Workers. Anyone signed in is signed out at their next step. Someone who also works for another, active Customer keeps access to that one only. Its emails stop, apart from whistleblowing case emails, and so does any Communication still being delivered; emails skipped meanwhile are never sent. No new Workers can be added, and its Contractor invitations can no longer be accepted. Its whistleblowing channel takes no new reports, but a Disclosure Handler can still sign in to work its open cases, and only those. Nothing is deleted: Workers' records and statuses stay as they are.
  • Archived locks the Customer in the same way, and makes it read-only, for Obtempera too: nothing about it can be changed until it is reactivated. Its Workers' records start their retention period on the day it is archived, and are deleted when that ends unless the Customer is reactivated first. An Archived Customer's card offers Reactivate instead, and its name cannot be changed. Its settings (logo, record retention, Privacy Notice, the Licensing switch, the Disclosure Administrators, add-ons) still show what was saved, read-only, with a line saying so. Its Health check verdict still shows: the check still runs on an Archived Customer, though the health check register lists working Customers only. Reactivating is the only change an Archived Customer takes: it cannot be made Suspended, which would have stopped its retention clock while everyone stayed locked out.
  • Reactivate (Active) lets everyone sign in again with the roles they had, and restarts its emails, invitations and whistleblowing channel. Emails skipped while it was locked are not sent. A reactivated Archived Customer can be changed again, and its records' retention clock stops.

The Subscription in Plan & Billing is a commercial record only: it locks nobody out.

Add-on Modules

One switch per add-on: Obtempera Training, Obtempera Audit, Obtempera Licensing, Obtempera Whistleblowing, Obtempera Employment Status, Obtempera Communications, Obtempera Reporting & Risk, AI assistance, UK right-to-work checks and Site induction. Only Obtempera switches add-ons on and off, here.

  • UK right-to-work checks: HR reviewers check a UK Worker's right to work from the share code on their form, through Vouchsafe, on the Customer's own Vouchsafe account and bill. Switching it on brings the check onto each UK Worker's review record and the Vouchsafe settings onto Customer Settings; nothing runs until a reviewer asks for a check. The Customer's Administrator connects its Vouchsafe account. The UK form asks for the share code whether or not the add-on is on: it also serves a manual check on GOV.UK.
  • Site induction: Workers are inducted in person on site. Switching it on brings the Induction page for the Customer's EHS Administrators, an induction setting on each Project and a confirm card in the Worker Portal; nothing changes until a Project is set to require induction.

A switch takes effect as soon as you confirm; if the change is refused (for an archived Customer, or Whistleblowing while the server has no report encryption key), the switch stays as it was and the reason shows under the add-on. Switching an add-on on says, in three lines, what appears and for whom, what happens when it is switched on, and what still needs setting up. Switching one off warns what disappears for everyone at the Customer, System Admin included; nothing is deleted, and what was saved comes back when it is switched on again.

An add-on that is off shows only its switch here: nothing about it can be set up until it is on. Once on, four add-ons get a card of their own below:

  • Obtempera Whistleblowing: the Disclosure Administrators. Appoint the first one with Appoint the first Disclosure Administrator: someone from the Customer's own staff with an Obtempera account, never a System Admin. They appoint the handlers and any further administrators. Switching Whistleblowing on is refused while the server has no report encryption key. Its badge reads Enabled · N administrators in green; when a report is waiting and the Customer has no Disclosure Handler to read it, the badge turns Red and reads Enabled · nobody can read reports · 1 report waiting: appoint a handler, or ask the Customer to. Obtempera's emails about such a report (a report has nobody to handle it, or a case due while the channel is switched off) open this page at the whistleblowing card. A handler appointed here is emailed, with the Customer's Disclosure Administrators, and named on their channel page as appointed by Obtempera; this panel shows only how many handlers there are.
  • AI assistance: the Country agents this Customer may use, switched one by one, and the Customer's own AI settings (provider, key, features, and who may ask), as its administrators see them on Customer Settings. AI runs on the Customer's own provider key: nothing runs until one is set.
  • UK right-to-work checks: The Customer's Vouchsafe connection, as the Customer's Administrators see it on Customer Settings.
  • Obtempera Employment Status: Assessment forms, the form sent for Ireland and for the United Kingdom (the Obtempera default, or one of the Customer's own status-assessment forms), as the Customer's Administrators see it on Customer Settings.

The other cards

  • Compliance workflow: the EHS review switch for each Project. HR review is always on. A review stage cannot be switched off while the Project's requirements need it; the refusal links to the Worker form, to review who assesses them.
  • Record retention: how long Worker compliance records are kept after a Worker's last assignment at the Customer ends (or after the Customer is archived), from 1 to 7 years, 6 by default. Shortening it asks first: records already past the shorter period are deleted within about 15 minutes and cannot be recovered. The Customer's Administrators can set it too, on Customer Settings.
  • Worker Portal: the Submission message a Worker reads the moment they submit their record. Leave it empty for the Obtempera default.
  • Branding: the Customer's logo, shown beside Obtempera's own (app header, Worker Portal, certificates, PDFs and exports, emails, site pass), its accent colour (refused when white text on it would fall below a 4.5 to 1 contrast; status colours never change), its welcome message, help contact and up to five policy links: the same card the Customer's Administrators have under Customer Settings. The logo never replaces Obtempera's logo or name. A new logo is checked for viruses first: until then the panel shows Being checked, and certificates and the Worker Portal show no Customer logo rather than a broken picture.
  • Email delivery: which mail server the Customer's emails leave through: Use the Obtempera default, or Use the Customer's own mail server with its own SMTP details and From address. Test connection and Send a test email to me use the values as entered; Save mail server keeps them. The password is stored encrypted and never shown again.

Privacy Notice, Training, Licensing

  • Privacy Notice: every Worker reads and signs it before anything else. The Customer uses Obtempera's default wording or its own; see Privacy Notice.
  • Obtempera Training, only while Training is on: the Customer's Training Courses, the ones its Projects can require. Import Courses from Obtempera Training adds one from the Customer's training provider. For a Customer on Obtempera's own hosted training there is nothing to import: the panel says its courses are built on the Training page, with Open the Training page.
  • Licensing, only while Obtempera Licensing is on: the licence requests the Customer's Administrators have sent. You answer them on Licence Requests. There is no job category choice: every Customer uses the one list on Job Categories.

Supply chain and Workers

  • Contracting Depth: the deepest layer of subcontracting on any of the Customer's Projects, and each Project's layers.
  • Workers: current, the peak, and since when the peak has been tracked.

Commercial

Plan & Billing: plan and subscription, billing cycle, agreed price and currency, billing period, contract dates and notice days, saved with Save commercial details. Auto-renewal applies the moment you switch it. Account Contacts: the billing contact and the primary account contact. Signed Documents: the signed contract PDF with its signed and effective dates; each version shows as Current or Superseded. The contract's expiry date is entered once, in Plan & Billing: it is the date the expiry banner and email use. An upload that is refused (not a PDF, or a date not written as YYYY-MM-DD) changes nothing: the current contract stays current. A new upload reads Being checked — available in a few minutes until its malware check is done. Account Notes: dated internal notes by category.