Workers

The Worker register: everyone in your scope, their status, and the way in to each record.

For: Contractor Administrator · Customer Administrator · HR Administrator · EHS Administrator · Report Viewer · System AdminLast checked: 2026-11-12Open this page in Obtempera ↗

What you see

One row per Worker you may see. A Contractor Administrator sees their own Workers and those of their subcontractors; a Customer Administrator sees every Worker of the Customer, its own workforce and its Contractors' Workers alike; HR and EHS Administrators see the Workers in the Countries or Projects they review; a Report Viewer sees the Workers of their Customer, or of their Contractor and the subcontractors below it; System Admin sees everyone. A Licence Reviewer has no register: they open one Worker's record from their review queue. The ? beside the title opens this article.

The columns:

  • Name, with the email (see below) and, where there is one, Next document expiry below it.
  • Role: the Worker's job title or trade, where their compliance record asks for one.
  • Contractor, marked Direct (your own workforce) or Indirect (a subcontractor's).
  • Projects, by code; point at one for its name and the Worker's status there.
  • Compliance: the Worker's colour (see Worker statuses). A Worker started on Add a Worker and not sent yet also says Started - not sent under the colour, and, for whoever may carry on with them, the row ends with Continue, which opens Add a Worker on that record.
  • Renewals due, for those who upload documents (below).
  • Last Updated.

All, Direct and Indirect, each with its count, switch between everyone, your own workforce and your subcontractors' Workers.

If you hold roles at more than one Customer (for example you administer one and review HR for another), the register shows one Customer at a time: the Customer filter lists only those Customers, with no All Customers, and opens on the one you administer. Direct and Indirect are judged for the Customer shown, so a Customer's own workforce is always Direct there.

Above the register, Total Workers (with how many Contractors), Green (with the share of Workers on live Projects), Amber (Compliant, a document expires soon: still cleared for site), Red (Not compliant, expired, sent back or training to do) and Not assessed (Not checked yet, or not on a live Project) count every Worker the search, the filters and the All/Direct/Indirect choice describe, not only this page. Click a tile to show only that colour; Total Workers shows them all again.

Finding someone

Search by name or email: the register follows what you type, from the second letter, as soon as you pause; Search or Enter searches at once. Clear appears once something is typed: it empties the search and resets the Customer, Contractor, Status, Compliance and Job Category filters and Active placements only.

On a computer, the Role, Contractor, Projects, Compliance and Renewals due column headings carry their own filters (Job Category, Contractor, Project, Compliance and Renewals due). On a phone those are in the Filters menu instead, with the rest.

Under Filters: Status (Active, Inactive, Left contractor, Suspended, Archived), Compliance (Green, Amber, Red, Not Assessed), Customer, Contractor, Project and Country. Job Category keeps the Workers with a placement in that category (or Not given, or Answer not in the Job Category list); Placements › Active placements only counts only placements still running, on the Project and in the Country chosen, which is how a count in Risk & Reports › People per role opens here. Documents expiring keeps the Workers with a current document running out in the next 30, 60 or 90 days.

Archived Contractors' Workers

The Workers of an archived Contractor are hidden by default: they are not in the table, the tiles, the All/Direct/Indirect counts or the export. Switch Show archived Contractors' Workers (above the table) to On to list them with everyone else, and Off to hide them again. The choice stays in the page's address (?archived=1) like the other filters. Filtered to one Contractor (from its own page, or Contractor under Filters), its Workers always show, archived or not, and the switch stays on.

Documents to renew

The register opens with the Workers who need attention on top: first those with an expired document to renew, then those with any other renewal waiting on an upload, then everyone else by name. If you upload documents for Workers (a Customer or Contractor Administrator), the Renewals due column says how many documents each Worker still has to renew, red once one has expired, and names them (up to three, then how many more) with the expiry date, or sent back, new copy needed or with the reviewer. A document with the reviewer is not counted as due. Click the Renewals due heading to put those with the most first; under Filters, Renewals due › Has renewals due keeps only those Workers, and Has an expired renewal, Has a renewal sent back and Has a renewal with the reviewer keep the Workers each of Today's renewal figures counts. The export includes the counts.

For the Workers you upload documents for, Upload, at the right-hand end of the row, opens a panel with each document, the Project, the date, and the reviewer's reason for one sent back. Upload the new document there: it goes to review, and the approved one stays in place until the new one is approved. A Worker whose renewals are all with the reviewer shows View instead. The reviewers' own list of renewals waiting for a decision is Document Review.

Sorting

The register opens in Needs attention first order (above). Click a column heading (Name, Contractor, Projects, Compliance, Renewals due, Last Updated) to sort by it; click again to reverse it. The arrow shows the order. The sort covers every Worker you can see, not only the ones on screen, and it stays in the page's address, so a link or a refresh keeps it. Filters › Sort by offers the same orders, and Customer too; use it on a phone. Compliance sorts Red first, then Amber, Green and Not assessed.

Opening a record

Click the row to open the Worker record.

Adding someone

Add Worker (top right) opens Add a Worker. Adding an email the Contractor already has uses that Worker's record: one person, one record per Contractor. Worker's language on that form sets the language of their invitation, their emails and their Worker Portal, until they choose their own there.

Import, beside it, adds up to 500 Workers from an Excel or CSV file: a preview marks each row, and nothing is added while any row needs fixing. See Import Workers.

Both buttons show only to those who may add Workers.

Pages and links

The footer says how many there are in all. Choose 25, 50 or 100 rows a page. The search, the filters, the page and the rows stay in the page's address, so Back, a refresh or a shared link shows the same view.

The export icon (an arrow into a tray, top right of the table) downloads every row of the current view, with its search and filters, as a spreadsheet (CSV): up to 10,000 rows, only what you can see here. Each export is recorded in the audit trail.

Several Workers at once

Tick the box beside each Worker's name, or the box at the top of the Name column to choose every Worker on the page. A bar appears above the register with how many are chosen (on a phone it stays pinned under the top bar as you scroll):

  • Resend invitations: a fresh portal link to each, the old one withdrawn. Workers who already have a portal account, or were invited less than an hour ago, are left alone, and so is a Worker whose only placement is on a Suspended, Completed or Archived Project (no email goes out for it; the reason is listed). The Resend invitation button on a Worker's own placement says the same.
  • Add to a Project…: choose the Project, then Add. Each Worker is added only where you could add them one by one: their Contractor must be yours to manage, registered in the Project's country and on the Project, the Project must be open, and the Worker's record must be Active.
  • Export icon in the bar: the spreadsheet above, for the chosen Workers only.
  • Message them: opens Communications with the chosen Workers as the audience (where Communications is on). Only those you can already write to receive it.
  • Clear unticks them all.

Each button shows only if you may do that for one Worker. When it finishes you see how many were done, and every Worker that was not, by name, with the reason. The choice covers this page only, so at most 100 Workers at a time; changing the page or a filter clears it.

More for System Admin

System Admin has a second bar under that one, for the same chosen Workers:

  • Choose all N matching, once the whole page is ticked: every Worker the search and filters find, not only this page; Choose this page only goes back.
  • Archive and Reactivate: archiving ends the Worker's placements, as on the Worker record; Reactivate brings back only Archived Workers. A Worker is archived, never deleted, from here.
  • New status…, then Change status: Active, Inactive (ends their placements) or Suspended (pauses them).
  • Send a message: opens Communications with the chosen Workers as the audience. Archived, Inactive, Suspended and Left-contractor Workers are left out, by name. Obtempera does not write to a Customer's Workers itself: to send it, view Obtempera as one of the Customer's administrators and open the same address again. A message is one Customer's, and names at most 100 Workers; the bar says so when the choice is wider.
  • The export icon moves to this bar: the chosen Workers, or with all matching chosen, the whole filtered view.

Before anything changes, one confirmation lists every chosen Worker and what happens to them (for example Active → Archived), and those that will not change, with why (Already Archived.). Each Worker then goes through the same checks as the status on their record, one at a time; one that is refused stays as it was. When it finishes the bar says how many changed and names every Worker that did not, with the reason, until you close it. A change takes at most 250 Workers at a time: with more chosen, narrow the filter (the export still takes them all).

Basic data and read-only roles

EHS Administrators and Report Viewers see basic Worker data only. The register shows them no email addresses, and the search box reads Search by name...: they find Workers by name. Someone who is HR as well as EHS sees the emails as HR does.

A Report Viewer reads the register and changes nothing: the page says Your workforce and their compliance status., and Add Worker, Import, Upload and the actions they may not take are not offered.