The Project record
One Project: its review stages, licence requirements, required training, Contractors and Workers.
Everyone who can open the Projects page can open a Project in it. Only the Customer's Administrators and System Admin change its Project Settings and Compliance Workflow; what else each person may do is said in each section below. A Report Viewer reads every section shown to it and changes nothing (it does not see Project Settings or the Site Induction row). EHS and a Report Viewer see basic Worker data only: the Workers list shows names, not email addresses, and the Project's Compliance Matrix is searched by name only and shows colours, statuses and reasons, not answers or reviewer notes (EHS still sees the answers on EHS's own items).
The ‹ beside the Project's name takes you back to the page you came from, with its filters and place kept; opened from an email, a bookmark or a new tab, it goes to the Projects list. The ? beside the page title opens this article. Contractors, Supply-chain map, Workers, Project Administrators, Site information, Compliance Process and Project Training Requirements start folded: click a heading to open it.
At the top
The Project's name and code, its Customer, Country, Project Status and Compliance: the Project's own colour, the worst of its Workers' colours. Any red makes it red, else any Worker in review or not yet checked makes it grey, else any amber (cleared for site, but a document expires soon) makes it amber; only all green is green. See Worker statuses and colours. On a phone the Customer and Country are left out of this strip, but Project Status and Compliance stay, on a row under the name.
Beneath are five figures: Workers (people on this Project now), Green, Amber, Red and Contractors. They count people, not placements. Then a small line of the share of this Project's live assignments that were green each day over the last 90 days, from a figure recorded every night (there is no history before the first night), and the Project's own Compliance Matrix.
Project Settings
For the Customer's Administrators and System Admin (Edit Project jumps here): Project name, Project code and Status, then Save Project. The Country is shown but cannot be changed here.
The status is Planned, Active, Suspended, Completed or Archived, and any status can follow another. Setting a Completed or Archived Project back to Active asks first (Reopen): it takes Workers again and counts in the figures. A Completed or Archived Project cannot be set Suspended (the option is greyed out): reopen it to Active first, then suspend it if needed. Workers can be added and invited while a Project is Planned and can fill in their records, but nobody can submit until the Project is Active. A Suspended, Completed or Archived Project is frozen: no new Workers or subcontractors join it, nothing is submitted or reviewed on it, its licence requirements cannot be changed, and it sends no emails. Its records stay readable, and it is left out of the compliance figures. Its page says so at the top, and does not offer + Add Contractor, + Add Worker or the review-stage switches until it is set Active again under Project Settings. There is no delete: a Project that is finished is set to Completed or Archived.
Reviewed by
Everyone who opens the Project sees a Reviewed by line (below Project Settings for those who have them). It names the Customer's reviewers for each stage the Project runs, for example Reviewed by: Ana Smith (HR), Bo Lee (EHS). A stage nobody can review yet says so (Nobody can review … here yet: appoint a reviewer for this Country or Project.); the Customer's Administrators and System Admin also get an Appoint a reviewer link to the Users page.
Contractors and Workers
Contractors lists each Contractor on the Project with its Layer, Workers, Subcontractors and Parent (Top level for one the Customer engaged directly). The first row is the Customer's own workforce (Your own workforce · on every Project in this Country): it is on every Project in the Country, is never added or removed, and is not counted in the section's Contractor count. Under each name, Reviewed by says who reviews its Workers on this Project: the Customer, or with Chain Review on, the Contractor directly above it. The Customer's Administrators add one with + Add Contractor; under Or one you already work with, an Inactive Contractor is not listed (set it Active on its record first), and a refusal shows at the top of the panel, which scrolls to it. A Contractor Administrator sees its own chain. A Contractor removed from the Project (Remove from Project on its record) leaves this list and the Project's current Compliance Matrix, with the subcontractors it brought onto the Project and their Workers' placements, so nothing below it is left reading Top level; the Matrix's history view still names it beside its ended placements.
The Supply-chain map draws the same Contractors as an org chart: the Customer, the Contractors it engaged directly (tier 1), their subcontractors (tier 2) and so on, each with its Workers on this Project and its compliance colour: the Contractor's own colour, the same as on the Contractors list (a declaration sent back makes it Red even when its Workers here are Green), with Workers on this Project: and their colour beside it. A reader who sees no Contractor colours elsewhere (EHS, a Project's HR) sees the worst of its Workers' colours here instead. A box opens the Contractor's record where you may see it. The Customer's Administrator, HR and EHS see the whole chart; a Contractor Administrator sees its own Contractor and everything beneath it, never the Contractors above or beside it. A Report Viewer sees what the administrator it reads for sees. On a phone the chart opens at the first tier; Show opens what is beneath a box. A Contractor removed from this Project leaves the map, with its Workers here, just as it leaves the Contractors list and the current Compliance Matrix: the chart and the counts above it show only the Contractors on the Project now.
Workers shows the first five (Showing 5 of N), each with their email address beneath the name (not for EHS or a Report Viewer), their Contractor, Compliance colour, Training (where the Customer has Training) and Project access (Ready or Not ready); View all opens the Workers page for this Project, and + Add Worker, for those who may add Workers, adds one to it.
Project Administrators
The reviewers appointed for this Project alone: HR Administrator (Project), EHS Administrator (Project) or Licence Reviewer (Project), added with + Add Administrator from the existing active users. Reviewers appointed for the whole Country review this Project too, and are not listed here.
Site information
What a person going to site needs: the address and a map link, access and parking (gates, hours, where to report), the PPE the site asks for, site contacts (name, role, phone, email) and up to twelve photos. The Customer's Administrators write it, and so do the administrators of the main Contractor on the Project (the one at the top of its chain); a subcontractor reads it like everyone else who can open the Project. It is shown exactly as written.
Google Maps embed (optional). To show a map on the page, open the site in Google Maps, choose Share, then Embed a map, then Copy HTML, and paste it into Google Maps embed. You can paste the whole code or just the address inside src="..."; Obtempera keeps only the address, and only an address that starts https://www.google.com/maps/embed is accepted (anything else says what to paste). A map link from Share goes in Map link, which keeps working as an Open the map link. Without a Google map, a Project with a latitude and longitude shows an OpenStreetMap map instead. A Worker sees a button, Show map, and the map loads from Google only when they press it, because Google can then see their device. Printing shows the address and the link, not the map.
The Workers placed on the Project see it in their portal (Site information on the Project's row). The email a Worker already using Obtempera gets when added to the Project carries the address, access and parking, PPE and contacts, with a link to the rest; a Worker new to Obtempera gets their portal invitation instead and finds it in the portal. Each photo is checked for viruses before anyone sees it, usually within a few minutes. Every change is recorded in the audit trail.
Compliance Workflow
The switches apply the moment you click them; only the Customer's Administrators and System Admin can change them, and everyone else reads On or Off.
- Country Compliance — a Customer policy for the Country, covering all its Projects: whether an external Contractor needs an approved Country Compliance Declaration before its Workers can be onboarded there. Switching it off asks first. Switching it on is refused with Appoint a reviewer first while Contractors there would declare and nobody holds the HR Administrator role for the Country to review them. Switched back on, nobody is cut off on the spot: a Contractor approved while it was off, one whose yearly review fell due meanwhile, or one part-way through its declaration keeps taking Workers for 30 days, and its administrators are emailed the date its declaration is due.
- Worker Compliance — shown here, not switched.
- HR Review — always on: HR reviews every item that no other stage reviews.
- EHS Review and Licensing Review (where the Customer has Licensing) — chosen when the Project was created, and switched here. Switching Licensing Review on, or either stage off, asks first. A change applies to every Worker on the Project who has not yet passed every review: a stage switched on is one they now pass through, a stage switched off is skipped, and a Worker waiting in it moves on. Workers already Compliant or Training outstanding, and ended placements, keep the stages they had.
A stage is refused, and the switch goes back, when:
- nobody can review it: Appoint a reviewer first, naming the role to give someone for this Project or its Country, with an Appoint a reviewer link to Project Administrators;
- it is switched off while items on the Project's Worker form are reviewed at that stage: the note names the stage and how many.
Where the Customer's Licensing is switched off, the Licensing Review row is not shown, like every add-on that is off, and the stage is skipped. The Project keeps its own setting: when Obtempera switches Licensing back on, the row and the stage come back as they were.
Where Licensing Review is on but the Project requires no licence, Licence Requirements says so: Workers pass Licensing review automatically and nobody checks their licences. Add the licences the Project requires, or switch Licensing Review off.
A Project you cannot open (out of your reach, or no longer there) shows Project not found. with a Back link to where you came from, or to Projects.
Chain Review
Chain Review (the switch The Contractor above reviews its subcontractors' Workers) decides who reviews this Project's Workers. Each Project has its own switch. It is off unless the Customer's Administrator (or Obtempera) switches it on, and switching it either way asks first; everyone else reads On or Off.
- Off (as every Project starts): the Customer's HR, EHS and Licence Reviewers review every Worker, whatever their Contractor's tier.
- On: a Worker whose Contractor works under another Contractor on this Project is reviewed - HR, EHS and Licensing - by the Contractor directly above it, never by one higher up. Workers of a top-level Contractor, and of a Contractor under the Customer's own workforce, stay with the Customer. The Contractor reviews only its direct subcontractors' Workers; a Contractor may be top level on one Project and a subcontractor on another, and each Project decides for itself.
- The Customer oversees: its reviewers still open every record, and can reopen any of them with a reason; the Contractor above can reopen what it reviewed. Records a Contractor reviews are not in the Customer reviewers' In review list or badge, and their emails go to that Contractor's reviewers.
- Each Contractor Administrator on the Project becomes its own Contractor's HR and EHS reviewer by default, and can appoint colleagues (and a Licence reviewer where the Customer has Licensing) on the Users page. If a Contractor above has nobody to review, its administrators and the Customer's are emailed.
- Switching it on applies from the next submission or review stage: records already waiting keep their reviewer. Switching it off hands every record still waiting with a Contractor to the Customer's reviewers at the same stage, so nobody is left waiting on a reviewer who can no longer decide; the confirmation says so. A Contractor's own reviewer roles stay on the User record while chain review is off but do nothing (the switch-off confirmation says so too), and an ended one cannot be switched back on until a Project the company is on has chain review on again. Country Compliance Declarations are always reviewed by the Customer.
Compliance Process, further down, draws the route a Worker's record takes: HR first, then EHS and Licensing in the Customer's Review order (Customer Settings), and last Compliant and Ready, or, where the Customer has Training, Training, Compliant and Ready: the record stays Training outstanding until the Project's required training is passed.
Site Induction
Where the Customer has the Site Induction add-on, the Customer's Administrators and System Admin also see a Site Induction row with the switch Site Induction required; nobody else sees it, and it is not drawn while the add-on is off. Switched on, Workers on this Project who are cleared for site appear on the Induction page until EHS marks them inducted. Switched off, it reads Workers on this Project are not inducted through Obtempera. The switch applies when you click it; if it cannot be saved, the reason is shown beside it.
With induction required, three more rows appear for the same people:
- Induction refresher: how many months an induction lasts (1 to 60) before the Worker is inducted again; blank means never.
- Not-inducted warning: how many days before a booked Worker's planned start the Calendar warns, in Amber, that they are not inducted yet. A whole number from 0 to 365 days; it starts at 7. 0 means no early warning: the entry shows Red from the start day only. Each Project has its own; there is no Customer-wide default. A change is recorded in the audit trail.
- Induction checklist: a Site Induction checklist from Fields & Forms, ticked once for the group when EHS marks Workers inducted.
Each number is saved when you leave the box or press Enter; a value outside the range is refused with the reason beside it.
Readiness Summary
How many of the Project's Workers may be given site access. A Worker is ready once their compliance record is approved, every required item is valid today and any training the Project requires is complete. A document or licence that is only expiring soon does not stop it.
Licence Requirements
Shown where the Customer has Licensing. The Customer's Administrators and HR set them; EHS and a Report Viewer read them. A Contractor Administrator does not see this section. (A Licence Reviewer does not open Project pages: it checks licences in its own review queue.)
- One list for Everyone on this project, and one per job category (Add requirements for a job category…).
- Each numbered card is one requirement: a name, the licences that meet it, with + Or another licence for accepted alternatives and + And another licence held with it for licences held together, and an optional Minimum tier for each licence, chosen from that licence's own tiers (Any tier, or a tier or higher); a licence without tiers has no Minimum tier.
- On a Suspended, Completed or Archived Project the list is read only: a line says so and how to change it (reactivate the Project in Project Settings, with a link there for those who can open it; anyone else is told a Customer Administrator can set the Project back to Active), and Edit, Add and Copy are not offered.
- Evidence: Card or certificate uploaded, or Card number and expiry date are enough.
- No older than (months): optional; the licence must have been issued within that many months.
- Each card reads as one sentence (Reads as: A Worker satisfies this by holding …), with who set it and when. Save list saves one list at a time.
- Copy from another Project… copies another of the Customer's Projects' requirements; replacing existing ones asks first. The copy is independent afterwards.
- For some job categories, Start from Obtempera's suggestion fills the draft; nothing changes until you save the list.
A change applies to Workers placed from then on; a Worker already on the Project keeps the requirements they started with, and so does one whose job category later changes. Where the Project's Licensing Review is off, the section says Licensing Review is off for this Project, so nobody checks these requirements, with a link to switch it on in Compliance Workflow.
Project Training Requirements
Where the Customer has Training, the Customer's Administrators (and System Admin) choose the courses Workers on this Project must complete. Everyone else sees a short Project Training card instead, which says training is not set up from this read-only view. A Worker whose reviews have all passed but who still has required training to do is Training outstanding (red, not cleared for site) until they complete it. Where the Customer has no Training, neither appears. On a Suspended, Completed or Archived Project the courses cannot be changed (the switch and buttons are greyed out) until it is set Active again. A library course Obtempera has withdrawn from the Customer stays in the list, marked Withdrawn by Obtempera, until you replace it: the list still saves, but the course cannot be added to another Project.
O.B.'s tour
O.B.'s reviewers tour, which starts on Users, ends on this page: first the Chain Review switch (off, your reviewers check every Worker here; on, the Contractor directly above each one does, and you can still reopen), then + Add Administrator, which ends the tour as its drawer opens. Where the Project has Chain Review on, his card about the first Contractor on it says so too. On a phone the walk-through waits for a tablet or a computer: the tip's own link, or a link reading Open the page where it has none to this page, brings you here instead.